null
close
close
215-646-4945

Open Monday - Friday

click to zoom in

Forza Lamborghini Murcielago / Huracan / Gallardo Electronic Valve Controller Kit

0 reviews Write a Review
RM2,326.32
SKU:
FC-LAM-B4A
Shipping:
Calculated at Checkout

The Forza Componenti exhaust valve controller kit is the complete solution that allows the user to take full manual control of the vehicle's vacuum-actuated exhaust bypass valves. The controller has a circuit board that controls the negative side of the exhaust valve vacuum solenoids. The user can manually open the exhaust bypass valves to have that classic engine sound at all speeds and engine RPMs. Of course, you can return the operation of the exhaust valves factory whenever you wish.

This kit provides three different operational modes:

  • Normal Mode:  In this mode, valves operate the same as stock.
  • Always Open:  Selecting this mode will force the exhaust valves open — and remain open.
  • Always Closed:  Selecting the Always Closed mode will force the exhaust bypass valves to remain closed at all times. This mode is especially useful to ensure that your vehicle is as quiet as possible.  Note: This feature was added at the request of people who track their cars at locations with strict noise standards and did not want the vehicle ECU to open the valves at high engine RPM.

Each kit is assembled using components designed to withstand the rigors of installation in the engine bay of a modern sports car. The enclosure is extruded aluminum. The internal circuit board will withstand the elevated temperatures that tend to exist in the engine bay of a vehicle. The connection cables are constructed using high serviceability TPE insulated cabling rated to 105° C. Connectors are weatherproof automotive connectors to resist moisture.

Plug-and-Play  ... 100% Reversible

The kit is completely plug-and-play. Power for the controller comes from the existing connector to the car's exhaust bypass vacuum solenoids, and no wiring modifications are required because the kit includes connector cables for the vacuum solenoids.

Installation is straightforward. You only need to select a location to install the controller, unplug the vacuum solenoids, connect the included cables, and route the cables to the controller. Once installation is complete, you use one button on your remote transmitter to open the exhaust bypass valves and the other button to close the valves and return control to the car ... and, you also have the ability to configure a manual on/off switch that you can mount inside your vehicle.

Since no modifications are required to install, if you ever want to remove the controller the installation is 100% reversible.

The controller includes one Remote Control Transmitter. Additional transmitters are available.

FITMENT:

  • Lamborghini Gallardo
  • Lamborghini Huracan
  • Lamborghini Murcielago

 

FEATURES:

  • Completely self-contained controller box
  • User configuration to use either the remote control key fob or a manual on/off switch
  • Approved FCC, CE, and all international governing bodies
  • Always Closed option can be used to keep the valves closed at all times
  • All internal components are integrated into the Printed Circuit Board for higher reliability
  • Fail-safe mode ... when vehicle ignition is turned off, exhaust bypass valve control reverts to factory ECU
  • No Check Engine Lights (CEL) or Diagnostic Test Codes (DTC)
  • Cables assembled using water and oil-resistant flexible cord - 18 AWG stranded Class K copper conductors per ASTM B-174. The cable is rated SJEEOW for severe outdoor service with TPE insulation rated to 105° C. Type SJEOOW cords are ideal for flex applications in harsh high-temperature environments where the highest degree of water and oil resistance and extended service life are essential.
  • All electrical cables use weatherproof connectors
  • High-gain external antenna for improved remote control performance
  • Kit includes full installation instructions and one remote control transmitter, mounting accessories including cable ties and high temperature tolerant adhesive mounts
  • Remote control can be programmed to newer versions of HomeLink (version 5 and higher) that are integrated into many cars. Older versions of HomeLink (earlier than 2013) will not support the 433MHz frequency of the remote transmitter
  • The controller kit is warranted to be free of defects. If the controller should fail within 12 months of installation, return it to us for repair or replacement

Customer Reviews

Write a Review Hide Reviews Show Reviews

We're currently working to get more reviews for this product. In the meantime, please take a look at our reviews from other platforms.

  • Mike L.

    Posted from Yelp

    i have their secondary cat by pass pipes and maxflow mufflers on my 958s. i also have their supersport exhaust on my 991. both sound amazing. i recently had a minor concern/problem and contacted them. john palo reached out to me the next day and sorted everything out. its been well over a year since i purchased and he took care of me no questions asked. johns customer service is top notch and i just wanted to write this review to thank him. great products and even better customer service, thanks fabspeed and john!

  • Anthony DiGiovanni

    Posted from Google

    Just got my Fabspeed Maxflo Mufflers installed on my BMW E90 M3! Could not be happier. I have a fully catless setup, and had trouble finding a suitable rear section that would bring the car to reasonable volume levels, reduce drone, and cut down on the inherent "raspiness" of the S65. This exhaust ticks all the boxes! The volume level is surprisingly tame for the car being fully catless, but certainly louder than the stock rear section. In-cabin noise or "drone" while cruising is greatly reduced compared to the muffler delete I was running previously. Exhaust is absolutely perfect for a daily driver. The "rasp" is just right as well. Sounds incredible on the downshifts. Power and low end torque, surprisingly enough, increased greatly. I keep getting compliments from people at car shows, gas stations, and even at stoplights. Fabspeed was an excellent company to deal with as well. The owner Joe Fabiani is a stand up guy, and scheduled me in super early on a Wednesday morning so I could make a business meeting later in the day. The service was fast and professional, and their tech Dustin walked me through the exhaust setup on my car, and allowed me to customize my choice of tips, and assure their placement is perfectly to my liking. I've read some distasteful reviews of Fabspeed as of late, but the majority of them are frankly not true. I am a former employee of the company, and have seen all the ins and outs of the sales team and fabrication facility. There is nothing out of the ordinary to see, and they will give any walk in customer a full tour of the facility showing off the cool equipment that they have to produce their systems. The recent slew of slander and distasteful reviews stem from one customer who tracked his car with a Fabspeed product not designed for the track, voided his warranty, and was stuck with the product. Fabspeed eventually made the situation right, but this customer has a reputation for slandering other businesses and throwing them under the bus for his own personal gain. It is painful to watch a company such as Fabspeed have to endure something like this, hence why I feel the need to address it in this review. Overall, great friendly service, awesome product, cool facility, and one AMAZING sound!

  • Rob Bianchin

    Posted from Google

    I had heard great things about Fabspeed from others in the industry but my expectations were definitely exceeded with this project. The team at Fabspeed went above and beyond when developing and building the exhaust system for our NSX. With the pictures and video commentary, they made us feel like we were a part of the action and that isn’t an easy to do when you are 800kms away and in another country. I know that there were many skilled hands that were involved with making this project come to life and I would like to extend our thanks to the entire team. Moreover, I’d like to take a minute to emphasize how much I appreciated having Alec quarterback this engagement. He was a key part in making this happen and was patient, professional, and extremely responsive at all hours of the day/night. The NSX was greatly missed while it was gone but it came back with a new set of lungs and the sound is much more fitting of a car in its class. We are already considering working with them on another project and I would highly recommend them.

  • Mark Russell

    Posted from Google

    Great experience working with Scott and the Fabspeed team. Cobb Stage 1 tune for my Macan blew away my expectations! Look forward to visiting the shop soon. Cheers!

  • Feraz S

    Posted from Google

    Extremely high quality product and great comms with their team. I bought the Fabspeed X Pipe and 200 cell Sports cats which have been fitted to my 1997 Porsche 993 C2S widebody for several months now and they are excellent! Firstly, they arrived in the UK carefully packaged and looking like works of art and much lighter than the stock item. The Porsche shop that fitted them for me were also very impressed with the quality and the perfect fitment. I have combined the Fabspeed X Pipe and Sports cat with the Fister Stage I which in my mind is perfect – a more throaty cold start which settles to a nice idle and produces a more aggressive tone at higher revs and enhances the classic air cooled sound without being too loud and has zero drone. Engine responsiveness and urgency also seems to have improved. The car sounds great and I am regularly asked for the details of the exhaust set up.