null
close
close
215-646-4945

Open Monday - Friday

click to zoom in

Forza Aston Martin Vantage / Vanquish / DBS Electronic Valve Controller Kit

0 reviews Write a Review
$824.75
SKU:
FC-ASM-B4A
Shipping:
Calculated at Checkout

The Forza Componenti exhaust valve controller kit is the complete solution that allows the user to take full manual control of the vehicle's vacuum-actuated exhaust bypass valves. The controller has a circuit board that controls the negative side of the exhaust valve vacuum solenoids. The user can manually open the exhaust bypass valves to have that classic engine sound at all speeds and engine RPMs. Of course, you can return the operation of the exhaust valves factory whenever you wish.

This kit provides three different operational modes:

  • Normal Mode:  In this mode, valves operate the same as stock.
  • Always Open:  Selecting this mode will force the exhaust valves open — and remain open.
  • Always Closed:  Selecting the Always Closed mode will force the exhaust bypass valves to remain closed at all times. This mode is especially useful to ensure that your vehicle is as quiet as possible.  Note: This feature was added at the request of people who track their cars at locations with strict noise standards and did not want the vehicle ECU to open the valves at high engine RPM.

Each kit is assembled using components designed to withstand the rigors of installation in the engine bay of a modern sports car. The enclosure is extruded aluminum. The internal circuit board will withstand the elevated temperatures that tend to exist in the engine bay of a vehicle. The connection cables are constructed using high serviceability TPE insulated cabling rated to 105° C. Connectors are weatherproof automotive connectors to resist moisture.

Plug-and-Play  ... 100% Reversible

The kit is completely plug-and-play. Power for the controller comes from the existing connector to the car's exhaust bypass vacuum solenoids, and no wiring modifications are required because the kit includes connector cables for the vacuum solenoids.

Installation is straightforward. You only need to select a location to install the controller, unplug the vacuum solenoids, connect the included cables, and route the cables to the controller. Once installation is complete, you use one button on your remote transmitter to open the exhaust bypass valves and the other button to close the valves and return control to the car ... and, you also have the ability to configure a manual on/off switch that you can mount inside your vehicle.

Since no modifications are required to install, if you ever want to remove the controller the installation is 100% reversible.

The controller includes one Remote Control Transmitter. Additional transmitters are available.

FITMENT:

  • Aston Martin DBS
  • Aston Martin DB9
  • Aston Martin Vanquish
  • Aston Martin Virage
  • Aston Martin Vantage
  • Aston Martin Rapide
  • Aston Martin Zagato (V12)

FEATURES:

  • Completely self-contained controller box
  • User configuration to use either the remote control key fob or a manual on/off switch
  • Approved FCC, CE, and all international governing bodies
  • Always Closed option can be used to keep the valves closed at all times
  • All internal components are integrated into the Printed Circuit Board for higher reliability
  • Fail-safe mode ... when vehicle ignition is turned off, exhaust bypass valve control reverts to factory ECU
  • No Check Engine Lights (CEL) or Diagnostic Test Codes (DTC)
  • Cables assembled using water and oil-resistant flexible cord - 18 AWG stranded Class K copper conductors per ASTM B-174. The cable is rated SJEEOW for severe outdoor service with TPE insulation rated to 105° C. Type SJEOOW cords are ideal for flex applications in harsh high-temperature environments where the highest degree of water and oil resistance and extended service life are essential.
  • All electrical cables use weatherproof connectors
  • High-gain external antenna for improved remote control performance
  • Kit includes full installation instructions and one remote control transmitter, mounting accessories including cable ties and high temperature tolerant adhesive mounts
  • Remote control can be programmed to newer versions of HomeLink (version 5 and higher) that are integrated into many cars. Older versions of HomeLink (earlier than 2013) will not support the 433MHz frequency of the remote transmitter
  • The controller kit is warranted to be free of defects. If the controller should fail within 12 months of installation, return it to us for repair or replacement

Customer Reviews

Write a Review Hide Reviews Show Reviews

We're currently working to get more reviews for this product. In the meantime, please take a look at our reviews from other platforms.

  • Ryan Bean

    Posted from Google

    Welcome to the jungle! My C8 Corvette with Fabspeed sport cats, full exhaust is unmatched in the game! Compliments everyday I take it out! Couldn’t be happier with the craftsmanship and service from Fabspeed Sports thank you!!!!

  • mario bellavia

    Posted from Google

    The team at Fabspeed is amazing! Their customer service, one on one consultation process, and performance packages are the best in the business. The shop is spotless, the décor is any man's dream cave.

  • Mike L.

    Posted from Yelp

    i have their secondary cat by pass pipes and maxflow mufflers on my 958s. i also have their supersport exhaust on my 991. both sound amazing. i recently had a minor concern/problem and contacted them. john palo reached out to me the next day and sorted everything out. its been well over a year since i purchased and he took care of me no questions asked. johns customer service is top notch and i just wanted to write this review to thank him. great products and even better customer service, thanks fabspeed and john!

  • Jon Washington

    Posted from Google

    Purchased the Competition Intake System from Fabspeed for my 996 Carrera. Fast shipping and great quality. The fit and finish of this product is second to none. Installation took no time at all and the mod really livens up the car. When you're at 4k rpm the noise that comes from that thing is incredible. Great customer service that quickly answers any questions too. I plan on buying headers from them this winter.

  • Mark Russell

    Posted from Google

    Great experience working with Scott and the Fabspeed team. Cobb Stage 1 tune for my Macan blew away my expectations! Look forward to visiting the shop soon. Cheers!

ASV Seal