null
close
close
215-646-4945

Open Monday - Friday

Fabspeed Chevrolet Corvette C8 Z06 Titanium Valvetronic Cat-Back Exhaust System (2023+)

0 reviews Write a Review
$6,195.95 - $6,595.95
SKU:
Shipping:
Calculated at Checkout
HP (whp) / (crank):
TBD
TQ (ft/lbs):
TBD
WT (lbs)/(kg)::
-35 / -17

The Fabspeed Titanium Valved Cat-Back Exhaust System is the ULTIMATE exhaust solution for the C8 Z06. It provides the same high pitched scream 6700rpm rip  that our Supersport X-Pipe exhaust has while also allowing the driver to quiet the exhaust down using the factory exhaust loudness settings. It’s totally plug-and-play with the factory exhaust valve electric actuator modules. Retaining ALL drive modes, and Z-mode abilities. NO FAULT CODES with Fabspeed Valved BECAUSE ONLY Fabspeed uses the WOLRDS VERY BEST EXHAUST VALVES from Helical limited Great Britain versus cheap Chinese garbage valves- like local competitors and all competitors. 

Our design process started with 3D scanning the entire OEM exhaust system using our CREAFORM 700 Handscan so that we could make a complete Solidworks 3D model of the exhaust. We then designed the exhaust and fixtures using that model so that the exhaust fit perfectly to OEM standards. After multiple revisions for sound and dyno testing we decided to use our signature cast Titanium X-Pipe to tie the two cylinder banks together for exhaust scavenging and to defeat resonance. The valves are mounted to CNC’d plates that resist heat and keep the electronics working under extreme conditions. The piping is mandrel bent from Titanium, and we use ultra high temp heat wrapping to keep temps in the engine bay down.

SOUND:

This incredibly versatile exhaust is able to go from tame cruiser, to thoroughbred race car with the press of a button. With the car set to the loud exhaust mode (valves open), you’ll be treated to a much more authoritative rumble at idle, and our signature Ti X-pipe bringing out the a high pitched wail that, dare we say, exceeds that of the Ferrari 458. With the Z06 set to quite mode (valves closed), it’s totally drone free and you can easily have a conversation in the cabin just like the OEM exhaust.

 

 

FEATURES:

  • Fits all Chevrolet Corvette C8 Z06 2023+ Models (Except EU Spec Models) 
  • Weight savings of -35 lbs / -17 kg vs the factory exhaust
  • Your choice of Carbon Fiber tips with new carbon fiber surround trim, TITANIUM QUAD tips blued titanium and or retain your factory quad Z06 tips
  • Plug-and-play Helical UK valves that completely retain the factory exhaust valve functionality- WITH 100% GUaRANTEED RELIABILITY . no fault codes like cheap mongrel exhaust valves.
  • Incorporates our signature cast Titanium X-pipe for superior flow and exhaust scavenging
  • Larger diameter tubing allows the Z06 engine to really breathe
  • Constructed from high-quality 14-16ga CNC mandrel-bent Titanium for optimum flow and maximum durability
  • NO CHEAP CHINESE PIE CUT  multiple pieces of titanium all welded together like a lobster tail. PIE CUT multiple pieces of titanium or stainless steel is INDICATIVE OF CHEAP SWEAT SHOW CHINESE LABOR and a lousy ALIBABA 100% guaranteed to fail system. Pie Cut AINT Craftsmanship. THINK- mandrel bent 1 piece tubing as much as possible is OBVIOUSLY stronger and flows more and reduced HAZ- look it up in welding heat affected zones. 
  • Laser scanned and CAD designed for perfect OEM fitment using an Ametek Handyscan 700
  • No Check Engine Light guaranteed
  • This cat-back exhaust is 100% emissions legal worldwide
  • Simple DIY bolt-on installation, no cutting or welding required
  • All hardware included
  • 100% built in house and DYNO developed at Fabspeed Motorsport USA
  • All Fabspeed performance products are backed by the Fabspeed Lifetime Warranty

c8-z06-valvetronic-exhaust-v1-vs-stock-oem-comparison-photo.jpg

Customer Reviews

Write a Review Hide Reviews Show Reviews

We're currently working to get more reviews for this product. In the meantime, please take a look at our reviews from other platforms.

  • Jon Washington

    Posted from Google

    Purchased the Competition Intake System from Fabspeed for my 996 Carrera. Fast shipping and great quality. The fit and finish of this product is second to none. Installation took no time at all and the mod really livens up the car. When you're at 4k rpm the noise that comes from that thing is incredible. Great customer service that quickly answers any questions too. I plan on buying headers from them this winter.

  • Joe Calvo

    Posted from Google

    I purchased the front licence plate bracket for my F430 and couldn't be more pleased.Install time 10 minutes, fits perfectly,looks great and you don't have to drill any holes in your $10,000.00 front bumper . A Plus all the way!

  • Anthony DiGiovanni

    Posted from Google

    Just got my Fabspeed Maxflo Mufflers installed on my BMW E90 M3! Could not be happier. I have a fully catless setup, and had trouble finding a suitable rear section that would bring the car to reasonable volume levels, reduce drone, and cut down on the inherent "raspiness" of the S65. This exhaust ticks all the boxes! The volume level is surprisingly tame for the car being fully catless, but certainly louder than the stock rear section. In-cabin noise or "drone" while cruising is greatly reduced compared to the muffler delete I was running previously. Exhaust is absolutely perfect for a daily driver. The "rasp" is just right as well. Sounds incredible on the downshifts. Power and low end torque, surprisingly enough, increased greatly. I keep getting compliments from people at car shows, gas stations, and even at stoplights. Fabspeed was an excellent company to deal with as well. The owner Joe Fabiani is a stand up guy, and scheduled me in super early on a Wednesday morning so I could make a business meeting later in the day. The service was fast and professional, and their tech Dustin walked me through the exhaust setup on my car, and allowed me to customize my choice of tips, and assure their placement is perfectly to my liking. I've read some distasteful reviews of Fabspeed as of late, but the majority of them are frankly not true. I am a former employee of the company, and have seen all the ins and outs of the sales team and fabrication facility. There is nothing out of the ordinary to see, and they will give any walk in customer a full tour of the facility showing off the cool equipment that they have to produce their systems. The recent slew of slander and distasteful reviews stem from one customer who tracked his car with a Fabspeed product not designed for the track, voided his warranty, and was stuck with the product. Fabspeed eventually made the situation right, but this customer has a reputation for slandering other businesses and throwing them under the bus for his own personal gain. It is painful to watch a company such as Fabspeed have to endure something like this, hence why I feel the need to address it in this review. Overall, great friendly service, awesome product, cool facility, and one AMAZING sound!

  • Ryan Bean

    Posted from Google

    Welcome to the jungle! My C8 Corvette with Fabspeed sport cats, full exhaust is unmatched in the game! Compliments everyday I take it out! Couldn’t be happier with the craftsmanship and service from Fabspeed Sports thank you!!!!

  • Zach Fowler

    Posted from Google

    Fabspeed earned these 5 stars. They design and deliver amazing products. They also stand behind their products. I purchased their Porsche 981 X-pipes as well as their proprietary tune. The XperTune made an immediate difference in my base Boxster (2.7 H6). It’s well worth the price in my opinion. The car is so much more fun to drive now! My Fabspeed purchases exceeded my expectations. Joe and Justin made the tune upgrade process seamless and their customer experience and support are industry leading. Fabspeed is the only business I’ll return to for my Porsche needs if I can help it.

ASV Seal