Canada
Euro
Australia
Pound
Peso
Singapore
Bahraini Dinar
Malaysian Ringgit
Qatar
Russian Ruble
The Eventuri G20 B58 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. We use 100% pre-preg carbon fiber with no fiberglass which means we can achieve a smooth internal surface to maintain smoother airflow. Here are the details for each component and the design ethos behind them:
Each intake system consists of:
Crafted from Prepreg Carbon Fiber, the airbox serves 2 objectives - to seal the filter against engine bay heat and to provide a dual cold air feed. Since the airbox is positioned next to the exhaust manifold it is crucial for the filter to be fully sealed so we designed the airbox to encapsulate the filter and at the same time provide a large internal volume. To seal the intake tube we have designed a laser cut plate with a rubber sealing strip which secures to the airbox. The intake tube passes through the plate and the rubber seal ensures heated air does not enter the airbox. To further minimize heat soak, there is an additional heat shield with a gold reflective layer on the exhaust manifold side which effectively combats the radiant heat transfer.
Having a fully sealed airbox results in the problem of having a restriction for the cold air feed. The stock airbox draws air from a single duct which extends to the front bumper area. During development we identified another area to draw cold air from which was a gap between the wheel arch and the chassis on which the airbox sits. To utilize this feed we extended a scoop at the back of our design which protrudes into the wheel arch and can even be seen after installation behind the front wheel. This second feed allows the turbo to draw from a larger area therefore reducing the restriction.
The G20 B58 OEM airbox system was updated in cars built after November 2018 where the airflow sensor was replaced with a temperature sensor in the inlet tube. Prior to this date, all airbox systems had an airflow sensor and for this reason we offer 2 variations. The V1 intake which has an inlet tube to take the MAF (airflow) sensor and the V2 intake for cars built after November 2018 which use a temperature sensor. The difference in the tubes can be see below.
The stock inlet tube has a flexible and convoluted section to provide movement with the engine. This however also adds the possibility of turbulence in the flow path as there are multiple faces which can cause eddies. We replace this with our carbon tube which is smooth and also has a larger internal volume. Unlike most aftermarket intakes we maximized the size of our intake tube, the OEM inlet tube has an internal diameter of 80.8mm or 3.2” at the filter end. Our tube for cars built after November 2018 has an internal diameter of 109mm or 4.3”. This equates to a massive 82% increase in cross sectional area over stock. The tube smoothly tapers down to the stock turbo inlet to ensure airflow remains as laminar as possible. The tube also has CNC machined fitting for the temperature sensor and the breather adapter.
Our cone filter is made from a non-woven mesh material which is double layered and is ISO tested to ensure that filtration is in line with OEM standards. The filter is cleanable and very stable at high temperatures with the base material being Urethane. The filter incorporates and internal flow guiding cone to help aid the airflow to converge while reducing the possibility of a stagnation point in the middle of the filter space. The filter medium has a significantly larger surface volume than the stock panel filter.
To RETURN any system, product or merchandise you must contact us first for a Return Authorization (RA) Number. Special order and custom made systems, apparel, Carbon Fiber Wall Art, and other certain merchandise are NOT returnable. ALL SALES ARE FINAL. To return a Fabspeed Motorsport product an RA number must be requested and if granted the item(S) must be in original Fabspeed Motorsport sealed packaging. A copy of the original invoice and a brief explanation must accompany all returned items. You must follow our instructions for returning items carefully, or Fabspeed Motorsport reserves the right to charge a 25% restocking fee on any OPENED box or repackaged products. Customers are responsible for return shipping charges. If an order was shipped with a promotional “Free Shipping”, and the order is returned, we exclusively reserve the right to charge the customer or distributor for the cost of that original shipping and handling. If a Fabspeed Motorsport Performance package is ordered, and an individual component of that package is returned, Fabspeed Motorsport reserves the right to charge back the performance package discount along with any additionally offered discounts. Return shipped items DAMAGED in transit will RESULT in additional charges up to and including rejection of the competent. It is the customer’s responsibility to ship safely and properly. No returns accepted after 30 days from the invoice date. No credits will be given after 30 days from the invoice date.
To qualify for return, the product must be unused and remain in the original packaging, as well as match the current design and packaging for the product at the time of return. Sounds is subjective and therefore does not qualify for a return of a used product. See Sound Solution Guarantee to see if your product is covered.
Periodically mistakes are made when ordering, or a wrong part is shipped, and you may wish to return an item. We will do everything reasonable to satisfy you. Please contact Fabspeed Motorsport immediately via email at service@fabspeed.com to discuss the circumstances before returning any products. Anything returned without prior authorization from Fabspeed Motorsport will be refused. All returns must be sent back fully prepaid. Our customer service department (service@Fabspeed.com) will issue a Return Authorization Number, which must accompany any return. A copy of the original invoice and a brief explanation must accompany all returned items. No returns accepted after 30 days from the invoice date. No credits given after 30 days.
Fabspeed Motorsport cannot be held liable for refusal of, delay of, loss of, theft or damage to a shipment of any item. The customer agrees to indemnify Fabspeed Motorsport for all costs, fees and expenses Fabspeed Motorsport incurs as a result of any violation of any local, state, federal, national or international laws or regulations. Customer agrees to take responsibility for lost packages that were not independently insured or sent without requiring signature. The customer understands they will be liable in the event of additional fees, tariffs, or legal issues such as border seizure. Customer accepts these risks and agrees to release Fabspeed Motorsport of all liability.
Fabspeed Motorsport reserves the right to charge a shipping and handling fee on every order being shipped from our facility. This fee is universal and applies to all retail and wholesale purchases and cannot be waived or credited.
A 6% sales tax will be implemented for every purchase made by a Pennsylvania resident. This fee will be charged for in-house installations and products purchased online, over the phone, and/or via email, this fee is required by law, is non-negotiable and non-refundable.
We're currently working to get more reviews for this product. In the meantime, please take a look at our reviews from other platforms.