null
close
close
215-646-4945

Open Monday - Friday

aFe Chevrolet Corvette C8 Track Series Carbon Fiber Cold Air Intake System (2020+)

0 reviews Write a Review
$997.95
SKU:
afe57-10013R
Shipping:
Calculated at Checkout

Large Five Layer Performance Air Filters:
Dual 4” Flange 360-degree radial flow air filters feature our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air, and in most cases deliver the highest power gains of our filter media options. This media is perfect for street and/or track use. Their inverted tops make for more filter surface area, resulting in longer service intervals.

Carbon Fiber Intake Tube:
Lightweight twill weave carbon fiber tube directs the filtered air from the dual air filters to the engine. It is computer designed and dyno tested to increase air flow while reducing weight and enhancing the visual appearance of the engine bay. The tube is manufactured out of 100% carbon fiber material (No fiberglass).

Heat-Resistant Housing:
The dual air filters are surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. It is precisely designed and manufactured to fit perfectly into the factory mounting location. The housing connects to the factory air inlets on each side of the vehicle to capture the coolest air available. Silicone bellow couplings are used for engine movement and easy installation. All the factory harness and mounts are transferred to the back of the aFe POWER housing for a factory like installation. The radio antenna plastic melded on the factory air box is also transferred to the aFe POWER housing. The removal of the antenna from the factory air box requires two plastic melted mounting tabs to be cut off.

Seals to the Trunk Cover:
The seal trim installed on the housing edge seals to the plastic trunk cover to protect the air filters from unwanted warm engine air. This set up allows for more aggressive air intake noise while not sacrificing any performance.

Premium Hardware:
Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available.

Fitment Note on Convertible models:
This item will fit convertible models but is not recommended because the seal trim will not seal properly to the trunk cover. 58-10007R and 58-10007D is preferred for convertible models because the cover in those kits will properly seal the housing.

Features:

  • Dyno-Proven Gains up to +12 HP and +10 Lbs. x Ft. TQ
  • Outflows Factory Intake by 15%
  • Measured Flow: 605 CFM @ 7" H20
  • Dyno-tuned lightweight 100% carbon fiber tube
  • Dual 360-degree radial flow performance air filters
  • Heat resistant housing that enclosed the dual air filter set up
  • Housing seals to the trunk cover to protect air filters from unwanted engine heat
  • Premium silicone couplings and hardware

The Best C8 Corvette Intake System on the Market 

Breathe new life into your C8 Corvette with one of the best modifications you can make: a free-flowing intake system with advanced filtration and heat-dissipation technology. 

Our premier C8 Corvette intake checks every box in performance, flow efficiency, and component longevity. Perfect as a standalone upgrade or as a synergistic improvement alongside our top-rated C8  exhausts, prepare to enjoy aggressive notes, superior component durability, and invigorating performance gains with Fabspeed Motorsport powering your C8 Corvette upgrades! 

All components in our C8 Corvette catalog come with precision-tuned fitment and ease of installation. This is a crucial reassurance with all Fabspeed Motorsport components; unlike questionable overseas manufacturers prone to fitment inconsistencies and defects, we exclusively fabricate and/or partner with 5-star brands that have earned a reputation for component precision. For a guaranteed fit and better service with every part, know that every item in our catalog comes with the Fabspeed Motorsport precision tuned-and-tested promise alongside our industry-leading lifetime warranty. 

Benefits of Upgrading Your C8 Corvette Intake System

High-flow intake equals engine efficiencies across the entire system. Drawing a larger volume of cool, high-velocity air results in lag-free combustion processes, cooler components, and, ultimately, greater power output. In fact, our Corvette C8 intake system outperforms the stock intake by a massive 15% in average flow volume! This substantial enhancement adds horsepower, torque, and throttle response while promoting engine component longevity with every revolution. 

Enhanced power output is also complemented by secondary benefits such as a more refined sound profile, reduced air filter maintenance frequency, and other surprising benefits like improved fuel efficiency and throttle response. These lesser-known advantages are key reasons that replacing your stock components with a less-restrictive C8 Corvette header and intake system can make a huge difference in overall performance and driveability. 

Other worthwhile reasons to consider a multi-purpose intake system upgrade include: 

  • Component preservation: When engine components are provided with the ample airflow they need, they last longer. Our superior intake systems are also crafted from ultra-resilient materials that are proven to resist deformation, degradation, and heat accumulation. These materials have advanced material properties that accelerate heat energy dissipation. 

  • Engine sound refinement: Your C8's mesmerizing purr is amplified with a better intake system. The filtration media's wider piping and enhanced surface area reduce the restrictive flow parameters, immediately producing a more pronounced and captivating tone. Pair with our top-rated exhaust components for a revolutionary auditory overhaul!

  • Aesthetic enhancement: This free-flowing carbon-fiber upgrade gives your engine compartment a sleek finish. Like all of the carbon fiber components at Fabspeed Motorsport, transformative style meets resilient material quality for improvements that look and perform better than imagined. 

If you have component inquiries or need assistance with the intake installation, contact our experts at Fabspeed Motorsport for friendly advice and affordable service today!

DISCLAIMER: This product removes the OEM intake filter system from the vehicle, and as such, is strictly intended for closed track events and off-road use only. This product contains a High-Flow Air Filter solely intended for track and race cars as it is NOT California Air Resources Board Certified (CARB) and not EPA certified. You are hereby informed and warned to check your local, state, and federal laws before buying and installing these or any aftermarket parts to be sure whether usage is in violation. All installation-risk and use-risk is borne by the end-user and installer of these parts.

Returns Policy

To RETURN any system, product or merchandise you must contact us first for a Return Authorization (RA) Number. Special order and custom made systems, apparel, Carbon Fiber Wall Art, and other certain merchandise are NOT returnable. ALL SALES ARE FINAL. To return a Fabspeed Motorsport product an RA number must be requested and if granted the item(S) must be in original Fabspeed Motorsport sealed packaging. A copy of the original invoice and a brief explanation must accompany all returned items. You must follow our instructions for returning items carefully, or Fabspeed Motorsport reserves the right to charge a 25% restocking fee on any OPENED box or repackaged products. Customers are responsible for return shipping charges. If an order was shipped with a promotional “Free Shipping”, and the order is returned, we exclusively reserve the right to charge the customer or distributor for the cost of that original shipping and handling. If a Fabspeed Motorsport Performance package is ordered, and an individual component of that package is returned, Fabspeed Motorsport reserves the right to charge back the performance package discount along with any additionally offered discounts. Return shipped items DAMAGED in transit will RESULT in additional charges up to and including rejection of the competent. It is the customer’s responsibility to ship safely and properly. No returns accepted after 30 days from the invoice date. No credits will be given after 30 days from the invoice date.

To qualify for return, the product must be unused and remain in the original packaging, as well as match the current design and packaging for the product at the time of return. Sounds is subjective and therefore does not qualify for a return of a used product. See Sound Solution Guarantee to see if your product is covered.

Periodically mistakes are made when ordering, or a wrong part is shipped, and you may wish to return an item. We will do everything reasonable to satisfy you. Please contact Fabspeed Motorsport immediately via email at service@fabspeed.com to discuss the circumstances before returning any products. Anything returned without prior authorization from Fabspeed Motorsport will be refused. All returns must be sent back fully prepaid. Our customer service department (service@Fabspeed.com) will issue a Return Authorization Number, which must accompany any return. A copy of the original invoice and a brief explanation must accompany all returned items. No returns accepted after 30 days from the invoice date. No credits given after 30 days.

Shipping

Fabspeed Motorsport cannot be held liable for refusal of, delay of, loss of, theft or damage to a shipment of any item. The customer agrees to indemnify Fabspeed Motorsport for all costs, fees and expenses Fabspeed Motorsport incurs as a result of any violation of any local, state, federal, national or international laws or regulations. Customer agrees to take responsibility for lost packages that were not independently insured or sent without requiring signature. The customer understands they will be liable in the event of additional fees, tariffs, or legal issues such as border seizure. Customer accepts these risks and agrees to release Fabspeed Motorsport of all liability.

Fabspeed Motorsport reserves the right to charge a shipping and handling fee on every order being shipped from our facility. This fee is universal and applies to all retail and wholesale purchases and cannot be waived or credited.

A 6% sales tax will be implemented for every purchase made by a Pennsylvania resident. This fee will be charged for in-house installations and products purchased online, over the phone, and/or via email, this fee is required by law, is non-negotiable and non-refundable.

Customer Reviews

Write a Review Hide Reviews Show Reviews

We're currently working to get more reviews for this product. In the meantime, please take a look at our reviews from other platforms.